Description of Problem 100000013816
How do I change the character font size?Description of Solution 200000017726
To change the character size:
1. Press the Function key.
2. Press the Left or the Right arrow key until Size is displayed.
3. Press the Enter key (above the Function key); the current size setting will be on the display.
4. Press the Left or the Right arrow key until the desire size is displayed (Large, Medium, or Small).
5. Press the Enter key to apply the selected size.
½-inch tape: Large = 24 Point, Medium = 18 Point, Small = 12 Point
3/8-inch tape: Large = 18 Point, Medium = 12 Point, Small = 9 Point
¼-inch tape: Large = 12 Point, Medium = 9 Point, Small = 6 Point
9/64-inch tape: All font size, Large, Medium, and Small = 6 Point
Note: There are three character size settings, Large, Medium, and Small.Besides the setting of the machine, the physical character size printed on the label also varies with the tape width. There are four tape widthsizes that can be use with this machine, ½-inch, 3/8-inch, ¼-inch and 9/64-inch. Each tape width (except for the 9/64-inch) has its own set of Large, Medium, and Small character sizes. The character size Medium printed on a ½-inch tape is different from a 3/8-inch tape, even though the same character size is set for both tapes. The character size setting has no affects on the 9/64-inch tape; the machine will automatically prints the largest character size that will fit the 9/64-inch tape.