Description of Problem 100000017000
How do I install , replace my correction
tape?Description of Solution 200000021735
To view a
video of these steps CLICK
1. Use the
spacebar or backspace to move the carrier to the center of the typewriter, then
turn off the typewriter and unplug the unit from the AC outlet.
2. Open the
Top Cover and remove the cassette ribbon, if installed.
3. Pull off
both spools by holding the correction tape taut between the spools; bring the
correction tape to a position parallel with the platen and lift up and
4. Pass the
new tape through left guide, behind the ribbon guide and out through the right
guide. The rough (sticky) side of the tape should face the platen.
the feeder spool to the pin on the left.
the take up spool to the pin on the right. Turn the take up spool
counter-clockwise until a small amount of white tape has wound around
the cassette ribbon and close the top cover, plug in the AC cord to the AC
outlet, and turn on the typewriter. Reset the typewriter by holding the
CODE key down and pressing the Q