Description of Problem 100000017000
How do I install , replace my correction
tape?Description of Solution 200000021735
the SPACEBAR or BACKSPACE to move
the carrier to the center of the typewriter, then turn off the typewriter and
unplug the unit from the AC outlet.
2. Open the Top Cover and
remove the cassette ribbon, if installed.
3. Pull off both spools
by holding the correction tape taut between the spools; bring the correction
tape to a position parallel with the platen and lift up and out.
4. Pass the new tape
through left guide, behind the ribbon guide and out through the right guide. The
rough (sticky) side of the tape should face the platen.
5. Attach the feeder
spool to the pin on the left.
6. Attach the take up
spool to the pin on the right. Turn the take up spool counter-clockwise until a
small amount of white tape has wound around it.
7. Replace the cassette
ribbon and close the top cover, plug in the AC cord to the AC outlet, and turn
on the typewriter.