Answer to your Frequently Asked Question:

 
Printer Friendly
Description of Problem 100000018836

How do I clear the message "Belt End Soon"?


Description of Solution 200000023960

The belt unit is a consumable item that requires periodic replacement. After you have printed approximately 50,000 pages, when printing on Letter or A4 size paper, the message "Change Belt Unit" will appear on the LCD display.

 

NOTE: The actual number of printed pages will vary depending on the print jobs and paper you use.

 

 

To view the machine's page counters, follow the steps listed below:

 

1. Press the UP OR DOWN ARROW key to select Machine Info. Press OK.

 

2. Press the UP OR DOWN ARROW key to select Page Count. Press OK.

 

3. Press the UP OR DOWN ARROW key to select Total.

 

4. Press OK.  The LCD will display the machine's page counter for color and monochrome (black and white).

 

5. Press CANCEL.

 

 

To view the remaining life of the belt unit:

 

1. Press the UP OR DOWN ARROW key to select Machine Info. Press OK.

 

2. Press the UP OR DOWN ARROW key to select Parts Life. Press OK.

 

3. Press the UP OR DOWN ARROW key to select Belt Unit.

 

4. Press OK. The LCD will display the remaining life of the belt (percentage).

 

NOTE: The life check of a part will be accurate only if you have reset the part's life counter when you installed a NEW part. It will not be accurate if you have reset that part's life counter during the life of a used part.

 

5. Press CANCEL.

 

 

The belt unit should be replaced as soon as possible to maintain the best print quality possible. You can purchase a replacement belt unit, part number BU200CL. If you find that your retailer does not carry the specific supplies and accessories you are looking for you can purchase them by calling our toll free Accessory Line on 1-877-552-MALL (6255) or shop on-line at our website at http://www.brothermall.com.

Was this helpful?
Please help us to improve our services by letting us know if this information was helpful: