Description of Problem 100000020400
How do install the cassette ribbon?Description of Solution 200000025773
1. Remove the
stopper from the new cassette ribbon and turn the ribbon feed knob
counterclockwise to remove slack from the ribbon.
2. Locate the
lugs on the back edge of the cassette and insert them into the locating holes in
the cassette ribbon table with the ribbon feed knob on the top of the
3. Rotate the
ribbon cassette down while guiding the ribbon between the ribbon
4. With the
ribbon between the ribbon guides, press the cassette down until it locks into
5. Turn the
ribbon feed knob again slightly counterclockwise to engage the ribbon feed and
remove any slack from the ribbon.