Description of Problem 100000022208
How do I install,change,replace the ink/cassette
ribbon?Description of Solution 200000028230
install, replace, change the ink/cassette ribbon:
Use the Space bar or the Backspace key to move the carriage to the
center of the platen.
To remove the cassette ribbon, hold the cassette with both hands and raise the
front end (near the platen).
Lift the used cassette up and out.
Remove the stopper from the new cassette ribbon and turn the ribbon feed knob
counterclockwise to tighten the ribbon.
Place the lugs on the back edge of the cassette into the locating holes in the
cassette ribbon table and slide the ribbon between the ribbon guides.
With the ribbon set between the ribbon guides, press the cassette down until it
locks into place.
Turn the ribbon feed knob again slightly counterclockwise to tighten the
Close the cover.
Press the CODE key and RESET key to move the carrier to the