is critical because it allows the image results to be �Balanced� for your
computer and scanner combination. If you switch the computer or the
scanner that you use, you must calibrate again for quality results. Should
the quality of you scanned document diminish cleaning the scanner and
calibrating again would be recommended.
Calibration can be performed using any TWAIN compliant application. The
DSmobileScan II software which comes on the DS600 scanner installation CD is
such a program.
The screen shots may be slightly different depending upon which scanner you have
and which operating system you have.
plug scanner into the USB port of your computer. Let a few seconds pass
while your PC recognized the scanner, then press the black button on the top of
the scanner and select a TWAIN compliant application from the box. The following
box should appear.
the custom button and the following will appear.
the calibration button and the following will appear.
pressing the calibration button insert the calibration sheet.
keep in mind that the special black and white glossy calibration sheet that came
with your scanner is recommended to obtain a perfect calibration.
calibration sheet for the DS700D is double sided.
two sides of the calibration sheet for the DS600 and DS610 scanners are
different and the proper orientation is important.
side of the calibration sheet will be facing down when inserted into the
side of the calibration sheet should be facing up when inserted into the
to insert the calibration sheet until it stops or the scanner feeds in the top
edge of the sheet.
the calibration sheet has been inserted, press the calibration button on the
calibration page displayed on your PC.
calibration sheet should start moving back and forth in the scanner. The
calibration sheet will finally be moved back to the insertion slot and the
following will appear.
the OK button you have successfully completed the calibration