Before installing the Software, the machine must be powered on and connected to
the wireless network. If you have already connected the machine to the
network, continue to STEP 2 to install the software
for each computer.
instructions on how to connect to the wireless network, refer to one of the
do I join the Brother machine to an Infrastructure Wireless
do I join the Brother machine to an Adhoc Wireless Network?"
do I join the Brother machine to an Infrastructure Wireless Network using
do I join the Brother machine to an Infrastructure Wireless Network using WPS
Wi-Fi Protected Setup?"
that you are logged on to your computer with Administrator rights. If you
are using a personal firewall (other than Windows Firewall), anti-spyware, or
antivirus applications, temporarily disable them.
the CD that is compatible with your operating
system into your CD-ROM drive. If the model name screen
appears, choose your machine. If the language screen appears, choose your
If the CD does not automatically run, double click on (My) Computer
on your desktop or through the File Explorer or click
Start => Computer.
Then double click on the Brother MFL-Pro Suite icon to run the
4. Click Install
After reading and accepting the ScanSoft PaperPort SE License Agreement, click
YES if you agree to the terms.
The installation of PaperPort SE will automatically start and is followed by the
installation of MFL-Pro Suite.
When the Brother MFL-Pro Suite Software License Agreement window appears, click
YES if you agree to the Software License Agreement.
Choose Wireless Network Connection and click NEXT.
Change the Firewall port settings to enable network connection with the
installation. (Recommended) Click Next.
you are using a firewall other than Windows Firewall or Windows Firewall is off,
you may receive a message warning you that the firewall could block network
communication. See the instructions provided with your firewall software
for information on how to add the following network ports:
network scanning, add UDP port 54925.
network pc-fax receiving, add UDP port 54926.
still have trouble with your network connection, add UDP port 137.
If the wireless settings fail and the machine is not found on the network, the
Wireless Device Setup Wizard will appear during the installation of the MFL-Pro
suite. Choose one of the following methods to resolve this issue based on your
you are certain that your machine is already successfully connected to your
network with a valid IP address, then click
instructions on how to perform a custom install.
your machine is not already successfully connected to the network with a valid
IP address, or you are not sure if it is, then complete one of the solutions in
STEP 1 to
connect your machine to the wireless network. Or click
instructions on how to use the Wireless LAN Setup Wizard with a USB cable to
connect to the network.
The installation screens will appear one after another. Please wait. It
will take a few moments for all the screens to appear. Do not try to
cancel any of the screens during this installation.
asked: Would you like to install this device software? Click
the On-Line Registration screen is displayed, make your selection and follow the
on-screen instructions. Once you have completed the registration click
NEXT to continue the installation.
The "Setup Complete" screen will appear:
you do not want to set your machine as the Default Printer, uncheck Set as
Default Printer. Click NEXT.
If you do not want to print a trial photo after the computer restarts, uncheck
Trial Photo Print.
Yes, I Want To Restart My Computer Now and click
FINISH. The computer will restart.
After restarting the computer you must be logged on with Administrator
the computer restarts, the following screens will appear:
When the Check
for Firmware Updates screen appears, choose the firmware update setting you
want and click OK.
When the Brother
Product Research & Support Program starts up, follow the on-screen
the Trial Photo Print screen appears, follow the on-screen instructions
to print a test photo.
Internet access is required for the firmware update and the Brother Product
Research & Support Program.