Answer to your Frequently Asked Question:

 
Printer Friendly
Description of Problem 100000030415

Our RJ4030 or RJ4040 is constantly getting paper jams, how can I correct this?


Description of Solution 200000039125

1.   Check that the ejection path is not blocked.

2.   Remove the RD roll and clean the roller and print head with a lint free cloth moistened with Isopropyl Alcohol.

                                  

3.   Re install the RD roll again as shown below:

a.    Press and hold the (Power) button to turn the printer off.   Turn and hold the cover open lever, and then open the RD Roll compartment cover.

b.    While pushing the adjuster lock in the direction of the arrow, move it to the left or right. Because the roll guide will also move, adjust the roll guide to match the width of the paper using the scale engraved on the inside of the printer.

c.    Insert an RD Roll into the RD Roll compartment upside down with the labels or receipt paper feeding from the bottom as shown.  Position the end of the RD Roll to touch the tear bar.

  

                                       

d.   Close the RD Roll compartment cover and then press and hold the (Power) button to turn the printer on.

If the problem still occurs, contact Brother Customer Service at 1-800-255-0415.  

 

Was this helpful?
Please help us to improve our services by letting us know if this information was helpful: