Answer to your Frequently Asked Question:

 
Printer Friendly
Description of Problem 100000034047

My Brother machine has no power. What should I do?


Description of Solution 200000043638

 

When the Brother machine is idle for a certain period of time, it enters Sleep Mode.  In Sleep Mode, the machine acts as though it is turned off and its LCD display will be blank.  If you press the LCD on the control panel, the machine receives a fax or computer data, or makes a copy, it will wake up.  

To determine if your Brother machine is in Sleep Mode, press the LCD display. 

- If your Brother machine's LCD lights up and displays the date and time, the issue is resolved.  For more information about Sleep Mode, refer to the solution:"Can I adjust my Brother machine's Sleep Mode setting?"

- If the LCD is blank continue to STEP 1.  

1. Verify the power cord is connected to the AC power outlet.   

- If the power cord is connected to a surge protector or power switch, remove the cord from that device and connect it directly to the outlet. This is for testing purposes. Removing such devices assists in determining if the blank LCD is related to the device or the Brother machine.   

NOTE: To protect your investment against power surges and lightning, Brother strongly recommends that you connect your machine to a surge protector.  In particular, we suggest that you use a surge protector that is compatible with both standard A.C. power cords and telephone line cords.  Surge protectors equipped with telephone jacks will assist in insulating your machine from any power surge that might travel through a telephone line. 

2. Verify your Brother machine is powered on.  

-        The ON/OFF key is located on the right side of the control panel.   Press the ON/OFF key for 1- 2 seconds.  When your Brother machine is off, the display will be blank.  

NOTE: If you have powered off the machine and unplugged the cord, you will have to press the ON/OFF key to turn the machine on after reconnecting the power cord.

3. If the LCD is still blank, do one of the following:  

-        Connect the Brother machine to another, known-working outlet.  

-        Verify the electrical outlet is working by plugging a known-working device, such as a lamp or radio, directly into the same outlet.  If that device does not work, the problem is related to the outlet or circuit.   

4. You may also need to check for tripped circuit breaker.  If a wall switch controls the outlet, verify that the switch is ON.

If the problem continues and your machine is within warranty, you can locate a Brother Authorized Service Center (ASC) in your area by clicking on the link below:

http://www.brother-usa.com/service/default.aspx or contact Brother Customer Service by calling 1-877-BROTHER (1-877-276-8437) Monday through Friday, excluding holidays.

 

If your machine is out of warranty, you can locate a Brother Authorized Service Center using the information listed above.

 

 

Was this helpful?
Please help us to improve our services by letting us know if this information was helpful: