and install the application from our website http://www.brothercloud.com
NOTE: An account must be created and a serial
number from the machine must be entered in order to get access to the
the software has been installed, please do the following:
Click on the icon to launch the program.
2. You can choose File => Scan
Settings to display the setting box below or just click the scan button on the
main menu if you wish to use scan defaults.
box allows you to set the default scan properties. These settings need
only to be set once unless you wish to change the scan method.
may choose QUICK SCAN to accept the scanning defaults shown above or choose Scan
With TWAIN User Interface to customize the options listed above.
this example below we are using Quick Scan with the default settings.
The option to use a carrier sheet is available if you feel the receipt is not
useable as is due to wrinkles or tears choose this box to use the carrier
the receipt in the carrier sheet and click the check box before initiating a
3. To begin, place a receipt
in the scanner face up and click the Scan icon.
4. Once scanning is complete
you will be asking if you wish to use a predefined template or manually enter
5. If you would like to use a
predefined template click the dropdown and chose the appropate vendor from the
6. If there is no matching
vendor, you can create a new template by clicking the radio button and clicking
OK to continue.
7. If you would like to
manually enter the data choose manually input later.
8. If you would like to
always choose this way; then click the box, apply to all.
9. Click OK to
continue. The Manual method is described below.
In the far right pane above the
receipt image are a few tools.
Listed in order from left to
Hand Movement tool to move the receipt
Crop Crops the image to the desired
Deskew Aligns the image.
Rotate Rotates the image.
Recognize Sets up the recognition
Undo Undo the last command
Redo Perform the same command again.
These tools will be used when
creating a new template or adjusting the OCR field area.
This software will capture 5 areas
on the receipt.
10. On the receipt, choose
the RECOGNIZE tool, and draw a box around the data to be captured.
11. Right Click in the box
and choose which of the 5 data types applies to the selected area.
In this case it would be
The OCR engine will return its
results, please make any changes needed or accept by clicking OK.
Continue to the next
12. Draw a box around
the date field on the receipt.
Right Click and assign this field
as RECEIPT DATE.
You may have to manually change the
date in the verification area if the OCR engine does not recognize the
Continue to the next
13. Draw a box around the
Right Click on Payment type to set
Continue to the next
14. Draw a box around the
Right Click and choose Amount to
set this field, or make any necessary changes and click OK.
NOTE: The sales
tax was not present in our example. If present you may also scan the sales
15. Once all 5 fields have
been programmed and recognized, look in the Data Verification Area to validate
the receipt data.
You have additional options in this
You can select a category for this receipt type, click the drop down and
choose an appropriate item from the list or type in your own.
The comments box allows you to describe the receipt which will aid in
searches in case you need to access it for a certain item or large purchase in
the case of warranty or proof of purchase.
The reimbursable check box allows you to designate if this is a
The Verified check box is used to indicate that you have examined the
receipt data and are satisfied that it is correct.
Placing a check in this box will cause a green checkmark to appear in the
b) If you
use the drop down above the data area and change it from ALL to UNVERIFIED, then
the receipts that you have checked will not be displayed.
To view all receipt data, return the drop down to ALL.
view all recently scanned receipts that have not been verified, choose Recently
16. The scan is now complete;
the data area will be populated with the receipt data.
17. If you have another
receipt to scan, place it in the scanner and begin this process once more by
clicking on the scan
If you need additional assistance,
please consult your user documentation that came with your product.