AccuLine Visual System


AS300 AccuLine Visual System

Hardware Installation (update 6/14/16)
Software Installation (update 7/25/16)
User Guide (update 6/14/16)
Setup Advice (update 2/18/16)


AS300 AccuLine Visual System

AccuLine Software v1.4 package (update 2/28/17) size: 147 MB (zipped)

This download includes the following items
  • AccuLine Documents - Install and Hardware
  • AccuLine Software Setup v1.4
  • C++ patch if error occurs installing Acculine Software
  • Win_Ver2.4.0_PDIP_ver1.6.2.1
  • PDIP_Manual
  • GT-3 Firmware v4.000003
  • GT3 Platen tool to be used if you are using a 16 by 18 platen


  • This Software only works on the Window OS.
  • Requires GT-3 print driver 2.4
  • AS300 Make sure that the PC system configuration settings are set to High Performance, Turn off any power-savings
  • Connect to USB 3.0 port only, not USB 2.0 port. You may need to check the specifications for your particular PC, as USB 3.0 ports and USB 2.0 ports look the same. The 3.0 is denoted by the SS USB symbol.
  • Use only the USB 3.0 cable supplied with the AG302. If a longer cable is needed, use a high performance USB 3.0 cable no longer than 3 meters (9 feet) to connect a wall-powered USB 3.0 hub to the USB 3.0 port on the PC. Then plug the USB 3.0 cable of the AG302 into the hub. Make sure the hub is powered and connected to the PC before attempting to connect the AG302 USB 3.0 cable to the hub.
  • Disable screen-saver programs on the PC.
  • Disable any other cameras built in of connected to the PC or it will cause conflicts with the camera software.