24 of 26 people would recommend this product.
This is a great product and has all the features we need for our home business. My only issue is at times such as booting and during some jobs it will draw as much as 11amps and blow out the lights. Of course like most folks I have 15 amp circuit. I had to bring in a dedicated circuit of 20 amps just because I purchased this unit. But caution them about the high amperage draw
0 of 1 found this review helpful.
Was this review helpful to you?
Yes
No
(Report as inappropriate)
Share this review:
I have used Brother printing products for years. I upgraded a very good MFC8860DN to the MFC8910DW. Windows 8 wireless setup was troublesome and took about 2 hours to set up because of the special drivers. I do not think it was the fault of the printer. Finally it was set up and the machine works very fast with crisp clean print. Duplexing is faster than on the previous machine. This machine also does duplex copy/scan which is a real time saver. So far, I am very pleased with the purchase.
Expertise
Professional or Expert
Use
Home Office (Business Use)
Brother products owned
More than 5
Label
Was this review helpful to you?
Yes
No
(Report as inappropriate)
Share this review:
I've purchased a number of low cost printers in the past for my home office. Most of these did the job but didn't have the features I needed (2 sided copy, large paper tray, easy to use multiple size copies and a high speed option). The MFC-8910 was easy to install and so far (2 months) very reliable and addresses nicely everything I need for my home office. I chose a non-color option to avoid the unnecessary expense for color print cartridges. One black cartridge is sufficient for at least 3000 copies.
So far -- so good.
Expertise
Advanced Amateur
Use
Home Office (Business Use)
Brother products owned
3
Label
Was this review helpful to you?
Yes
No
(Report as inappropriate)
Share this review:
I bought the MFC-8910DW a week ago to replace an older MFC-8460N. The print quality is excellent so far and the scan speed is markedly faster (though the delay before it starts seems the same). My only criticism so far is that the plastic parts seem flimsy in comparison to the MFC-8460N. I notice it particularly in opening the front panel to feed in checks and in lifting up the platen. I am the only one using the printer so I’m being very careful and gentle in hopes nothing snaps off and/or breaks.
Expertise
Professional or Expert
Use
Home Office (Business Use)
Brother products owned
2
1 of 1 found this review helpful.
Was this review helpful to you?
Yes
No
(Report as inappropriate)
Share this review:
