This kit includes 6 high quality scissors, designed for precision cutting for a range of sewing and embroidery uses. Includes: 4" Large Ring Micro Tip, 4" Large Ring Curved Tip, 6" Double Curved Machine Embroidery Scissors, 4.5" Angled Tweezers, 6" Straight/Sharp Trimming Scissors, and 4.5" Micro Serrated Curved Snip.

Genuine Brother® Accessory. Exclusively for centered straight stitching quarter inch seams on fine fabrics. Quarter inch piecing foot with blade for seam sewing. Accurate reference marking on 3 sides of foot for visibility and accuracy. Single hole foot prevents fabrics from sinking into feed dogs.

For quilt and patchwork piecing with 1/4" or 1/8" seam allowances. Using the center needle, straight stitch position, the right front edge of this foot provides a guide for creating even ¼-inch seams for quilts, doll clothes and heirloom sewing projects. When using the left side of the foot as a guide, an 1/8-inch seam is created.

Genuine Brother® Accessory. The groove under the foot is slightly wider and flatter than the Picot Foot and is designed to create a flat narrow hem on lightweight fabrics.

Genuine Brother® Accessory. Secure and apply cording in one step. Allows for the insertion of cords held by a notched clip with cords being stitched down using a serpentine zig zag or decorative stitch. Couch multiple threads with zig zag stitches. Flexible grooved securing attachment handles threads of varying thicknesses.

Genuine Brother® Accessory. Open toe foot for 5 mm feed dogs on vertical bobbin case machines. Open Toe foot is used with any application where extra visibility while sewing is desired. Use where visibility is important for seams with markings or curves and pattern markings. Wide opening for wide range of left to right needle positions.

Genuine Brother® Accessory. Sews corded pintucks on garment and home decorating projects. Pintuck foot for 5mm feed dog width. Secure up to 5 threads, vary pin tuck width by moving threads in grooves. 5 grooves on sole plate for precise formation of pintucks.

Genuine Brother® Accessory. This foot attaches zippers and pipings easily. Its position can be adjusted exactly on the edge of the zipper/piping, avoiding the non-flat parts of them. It also presses the fabric with just the right pressure. Adjustable zipper foot for left or right seams. Adjustable guide to accommodate varying piping dimensions. Single stitch opening for accurate and perfect straight stitch creation.



Requires Low Shank Adapter for ULT Series, PC-6500, PC-8200 and PC-8500 sewing machines.

Genuine Brother® Accessory. Attaches bias tape with widths less than 7 mm (1/4 of an inch) using straight, zig zap or decorative stitches. The design of this foot will place your ready-made bias tape or will fold and place precut bias strips correctly for easy sewing to the edge of a fabric

Genuine Brother® Accessory. A great foot for both embellishing and utility use. Adjustable for creating blind hems on a variety of fabrics. While designed for blind stitching, the foot works well for edge stitching, lace and fabric edge joining.

The adjustable guide on this foot offers perfectly centered hands free placement of cords, ribbon, braiding, or tape up to 5mm in width.

Clearview Foot is used with any application where visibility of seams or pattern markings is desired for ease in embellishment.

Genuine Brother® Accessory. Parallel grooves on the underside of foot hold a concealed zipper in place for easy installation of the zipper.

Genuine Brother® Accessory. Perfect for precise and easy joining of fabrics, even sheers and difficult fabrics. Hold fabrics in place while leaving a space to allow open decorative stitches such as open weave stitches. Reference marks to increase accuracy. Foot can be used to line up and sew edgings such as lace to edges of other fabric. Centered blade enhances ability to follow the edge of the fabric.

The Fringe foot is a good tool for creating 3-D flowers, heirloom seam joins, surface texture and custom trims with a simple zig zag stitch. This foot was originally designed and used to mark construction details by creating tailor tacking, so feel free to use it as a great marking too as well!

The Gathering Foot can be used for lightly gathering fabric as well as attaching the gathered edge to a flat (ungathered) fabric, at the same time quickly and easily. The gathering foot will allow the sewer to gently ease or slightly gather fabric for various garment and home decorating applications.

This 5-groove pin tuck foot, when used with a twin needle, helps you to make virtually perfect pin tucks, and is also perfect for sewing corded pin tucks on shirts, blouses and many home decorating projects. This foot is ideal when making pin tucks with slightly larger intervals, and for more prominent tucks on medium-weight fabrics. Not recommended for use with firm or thick fabrics. For Use With: PC-8500D, PC-6500, SE-270D, NX-200, XL-2230, NX-400, NX-400Q, NX-600, PS-1000, PS-1250, PS-3100, LS-2125i, XL-2610, XL-2600, XL-5500, XL-5600, XL-5700, XL-6452, XL-3510, XL-3500T, XR-65T, XL-6562, CS-80, CS-8060, CS-8150, ES-2000, CS-6000T, XL-5130, XL-5340, XR-33, XR-40, CS-100T, CS-6000, CS-8072, ES-2000T, Innov-ís 1000, Innov-ís 4000D, LS-

Perfect for sewing on vinyl, velvet, suede and leather fabrics. The dual rollers on this 7mm snap-on foot help provide for more accurate and consistent sewing, as the rollers work in tandem with the machine feed dogs to pull the fabric through, for a more consistent fabric surface. This foot has a wide needle opening, allowing for a range of stitch widths.

Designed for quilting and other projects that require stitching over an existing seam, this foot rides smoothly over the seam, helping to ensure your stitching remains more perfectly aligned while you ‘stitch in the ditch’. The long guide and wide opening on this foot allow for more accurate sewing and stitch placement.

Genuine Brother® Accessory. Designed for consistent feeding with fabric such as leather, vinyl and other novelty fabrics. Non-stick foot glides over difficult fabric surfaces with ease improving stitch quality in many problem fabrics (some fabrics may bind under metal feet often causing problems in consistant feed resulting in poor stitch quality). The non stick foot overcomes problems with fabric such as loop and hook tapes, leather and vinyl. Similar to standard J and Clear-view feet.

The Overlock Foot is used for sewing overcast seams and protect edges from fraying. Use the overcast stitches in your machine and see what a difference this foot makes in their appearance and functionality!

Genuine Brother® Accessory. Roll fabric edge and hem stitch at the same time. Picot foot looks similar to narrow hemmer foot but is designed to create a shell look edge on lightweight fabric. Groove on sole of foot has been specifically developed to match width of picot stitches for perfect stitch formation. Groove on sole of foot allows stitches to feed evenly while being created and sewn.

Designed for creating custom piping, for home dec and other uses. The over-sized channels in this 7mm snap-on foot provide more accurate placement of piping, and the wide needle opening allows for a range of stitch widths.

The adjustable guide can be used to sew parallel rows at preset even intervals. Slide straight bar into the hole of the presser foot ankle or walking foot (equipped with a mounting hole). The distance from the needle may be adjusted by sliding the guide from left to right.

Genuine Brother® Accessory. The design of this foot improves contact with the feed dogs resulting in more accurate and consistant feed which creates a higher quality straight stitch. Also used for straight stitch applications using fine or lighter weight fabrics where a wide center foot opening might cause the fabric to be pulled into the bobbin area.

Genuine Brother® Accessory. The walking foot is a moving feed system that holds and moves fabric between the presser foot's upper feed dog and the machines's lower feed dogs to better control difficult fabrics as well as multiple layers of fabric. The walking foot is great for quilting, sewing when matching prints or plaids or fabric drift is an issue.



Brother® offers several Walking Feet which differ in the size of the feed dog, shank height etc. Please check your manual or the machine listings on this website to find the correct Walking Foot to fit your machine. Walking Feet are not for use in reverse or side to side sewing as well as some built in stitches that include other than forward movement of the feed dogs.

High Quality Clear Plastic Bobbins
7/16 inch deep
Security notch for consistent bobbin thread winding
10 bobbins per pack