Description of Problem 100000022561
How do I adjust how the tape is fed and cut?Description of Solution 200000028718
The Cut function enables you to specify how the tape is fed out after it is
printed. The settings of the CUT function consist of combinations of two
different cut methods:
(where the machine stops printing so the label can be cut ) and chain
printing (where the last copy is not fed out to be cut, reducing the amount
of tape that is wasted).
printing is an economical function designed to help eliminate wasted tape at the
beginning of labels.
Without chain printing, the excess from the previous printing session is cut
before the first label in the current session is printed. However, if a setting
using chain printing is selected, the last label in the previous session remains
in the machine (is not fed out), so that the next label can be printed without
wasting tape. When the last label is printed, press the FEED/Back Light key to
feed the chain of labels, and then press the tape cutter to cut it.
following settings are available: (The default setting is 1.)
1(cut-pause; no chain printing)
2(no cut-pause; no chain printing)
3(cut-pause; chain printing)
4(no cut-pause; chain printing)
change the cut option:
Press the CODE key, then press the Z key.
Press the LEFT or RIGHT ARROW key until CUT is
Press the UP or DOWN ARROW key until the desired setting is displayed,
and then press the NEW BLOCK key.
After printing with the CUT function set the 3 or 4, OK TO FEED? will
appear. Press NEW BLOCK to feed. Press the BS key to return to
entering text mode.