Description of Problem 100000023443
How do I adjust the tape margin?Description of Solution 200000029873
1. Press the
LABEL function key to display the Label attributes menu.
2. Press the UP
OR DOWN ARROW key until the setting for the MARGIN is highlighted on
3. Press the
LEFT OR RIGHT ARROW key to select the desired
There are four
Each label is printed leaving a margin of 0.98" (25 mm) on each end.
margin of 0.98" (25 mm) is printed first, and then each label is printed leaving
a margin of 0.47" (12 mm) before and after the text.
are printed in front of the text. Cut along the printed dots with
Narrow: A margin of
0.98" (25 mm) is printed first and then each label is printed leaving a margin
of 0.16" (4 mm) before and after the text.
Dots are printed in front of the text. Cut along the printed dots with
Chain: Use this
setting when printing several labels with minimum margins. Feed the tape before
using the cutter. Otherwise a part of the text may be cut off. Do not try to
pull the tape since this may damage the tape cassette.
pressing Print, OK to Feed? appears. Press the Escape
enter more texts or press the OK
feed. The final label is printed with a 0.37" (9.4mm) margin to the right of the
characters. Use scissors to cut off any part of this margin that is not
4. Press the OK
or Enter key to apply the settings.
settings are NOT applied if you do not press the OK or Enter