Warranty Extension

An EMA is an Extended Manufacturer’s warranty agreement and is purchased directly from Brother International Corporation. An EMA begins the day after the limited warranty expires, except for Onsite Upgrades, which start the date the machine is purchased and replaces the Limited Warranty provided with the machine. The Extended Manufacturer’s warranty Agreement (EMA) is the only agreement available for your Brother product that is provided directly from the manufacturer.
 An EMA must be purchased before the expiration of the standard warranty.
 Please refer to the corresponding order forms for supported Mono-Laser, Color-Laser, Ink Jet, Scanner, and Labeler models.

Exchange Service: The customer calls the priority customer service line and troubleshoots with a Brother representative over the phone. If this does not solve the issue, then a factory-reconditioned unit is shipped the next business day to replace the customer's malfunctioning unit. Brother will cover shipping charges, and the replacement will contain a return label to send the malfunctioning unit back to Brother. 

The customer uses the box which the replacement unit and packing materials were shipped in to repack the malfunctioning machine. The prepaid return label, located inside the shipping packet attached to the outside of the box also containing the outgoing shipping label, will be used to return the malfunctioning unit to us. The customer must place the malfunctioning unit in the mail within 5 business days of receiving the replacement; otherwise, the customer will be charged the estimated street price for the replacement unit.
 Depot Service: The customer calls the priority customer service line and troubleshoots with a Brother representative over the phone. If the issue cannot be corrected, you will be referred to the nearest Brother Authorized Service Center (ASC). The cost of parts and labor are covered. The customer is responsible for bringing the machine and picking it up from the ASC. Should the customer choose to ship the machine to and from the ASC rather than transport it themselves, the customer assumes those costs. Brother will not cover any damage resulting from any transport of the machine to and from the service center.
 Onsite Service: The customer calls the priority customer service line and troubleshoots with a Brother representative over the phone. If the issue cannot be resolved, Brother will provide "On-site Warranty Service." "On-site Warranty Service" means remedial service at your location to restore the product to good operating condition under normal usage at no charge for parts or labor. Customers can expect a call within 24 hours of contacting Brother to coordinate the onsite visit. A Brother authorized service technician will arrive at your site to service your machine.

There are two levels of On-Site Service Warranties that are sold separately.   Onsite Upgrade: Brother will upgrade the standard limited warranty included with the product to "On-site Warranty Service." The On-Site upgrade is in effect for the same warranty period as the standard limited warranty.   Onsite Extension: Starts the day after the standard warranty expires. Provides “On-Site Warranty Service” after the standard limited warranty period expires. The original standard limited warranty will still be in effect until it expires. You must purchase both On-Site Upgrade and Onsite Extension Warranties to both upgrade and to extend the standard limited warranty with “On-Site Warranty Service.”

An EMA covers any mechanical or electrical malfunction with the machine. Except as otherwise provided herein, Brother warrants that the Machine will be free from defects in materials and workmanship, when used under normal conditions during the time that the EMA is effective.
 An EMA does not cover the following:
 Physical damage to the Product
 Damage caused by improper installation, improper or abnormal use, misuse, neglect or accident (including but not limited to transporting this Product without the proper preparation and/or packaging)
 Damage caused by another device or software used with this Product (including but not limited to damage resulting from use of non Brother™ brand parts and Consumable and Accessory Items)
 Consumable and Accessory Items that expired in accordance with a rated life
 Issues arising from other than defects in materials or workmanship
 Damage caused from service, maintenance, modifications or tampering by anyone other than a Brother Authorized Service Representative
 Cleaning that is considered routine and can be performed by the customer without damaging the machine
 Normal Periodic Maintenance Items beyond their rated life, such as Waste Ink Absorber, Paper Feeding Kits, Fuser, and Laser Units This limited warranty is VOID if the Product has been altered or modified in any way (including but not limited to attempted warranty repair without authorization from Brother and/or alteration/removal of the serial number).

EMA customers are given a toll-free Priority Service Number to use if they require service. This toll-free number is for Extended Manufacturer's Warranty Agreement customers and will take precedence over non-contract customer calls.

Your EMA can be renewed within 90 days prior to the expiration of your extended warranty. Customers may renew by credit card by calling 1-908-655-9992. Representatives are available Monday - Friday, 9:00 AM to 5:00 PM Eastern time, excluding holidays.   Please note: If the renewal payment is not received by the renewal date, the EMA will automatically expire.