Create seasonal home decor with some colorful vinyl, a signboard, and your ScanNCut!
You will need:
- Signboard or chalkboard about 15.5” W x 7.5” H, red, gold, and white vinyl rolls, roll feeder, transfer sheets, ScanNCut, Auto Blade
1. Download “Gold_Vinyl.fcm” to your machine.
2. Load the roll feeder with gold vinyl.
3. Cut out the decal designs. Set aside.
4. Download “White_Vinyl.fcm” to your machine.
5. Repeat steps 2-3 with the white vinyl.
6. Download “Red_Vinyl.fcm” to your machine.
7. Repeat steps 2-3 with the red vinyl.
8. For all the designs, weed away all excess vinyl.
9. Apply a piece of transfer sheet on top of each weeded vinyl design, using the sheet to remove the vinyl from the adhesive backing.
10. Using the transfer sheet, apply the white vinyl design to the center of your signboard. Carefully peel away the transfer sheet.