I was so excited to see this new Brother CV3550 Double-Sided Cover Stitch Machine
and I can think of so many applications for these decorative stitches including sportswear, decorative stitching, chainstitch, hemming knit, and so much more! I am going to start our tutorials with the top cover stitch machine by showing you an in-depth look at threading the machine, including the top cover thread. At first it might look intimidating, but threading is quite simple. Start by taking you machine out of the box. Remove the packaging tape and plug in the machine. If your machine already has the top cover stitch threaders attached it will look like the photo below. If not, the video will show you how to remove and reattach these parts. You will need 5 spools of serger thread to thread the entire machine (I am going to use different colors so you can see a little better). When threading the CV3550, start with the looper which is the spool on the far-right side. You will then move onto threading the needles. For this demonstration I am using all three needles.
- Before threading the top coverstitch thread, stitch a few stitches with just the coverstitch set up.
- Make sure the needle threads are behind the metal bar or they can get caught when using the top threader.