Video Sew A Long: Canvas Tote Bag: Part 2: Pocket

Video Sew-A-Long: Canvas Tote Bag: Part 2: Sewing the Outside Pocket


Angela uses the ST371HD Strong & Tough Sewing Machine
to construct her bag. Feet used in this Sew-A-Long: Plastic Non-stick foot, basic Zig Zag foot for straight stitching. I hope you are as excited for this Sew-A-Long as I am! In Part 1
we gathered our supplies and cut out the pattern. In this lesson we will be sewing the Outside Pocket. My pocket is large enough for my cellphone or tablet, but remember you can customize your bag to whatever size you need! The outside pocket is a great place to add a monogram with applique or embroidery. For tips on embroidering a monogram on canvas pop over to my Video Post: Add a Custom Monogram to a Canvas Tote
. IMG_1638_pt2CanvasBagSewALong Start by layering the #3 OUTSIDE POCKET lining and canvas fabric with wrong sides together. Baste or pin the layers together. CANVAS TOTE BAG PART 2(13) Fold the #4 VINYL TRIM piece in half and clip to the top edge of the pocket. CANVAS TOTE BAG PART 2(16) Set up the Brother sewing machine for a straight stitch with a stitch length of 4.0 and change the foot to a plastic foot. CANVAS TOTE BAG PART 2(18) Stitch about 1/8” from the edge of the vinyl trim. CANVAS TOTE BAG PART 2(19) Trim off any excess vinyl from the edge of the pocket. CANVAS TOTE BAG PART 2(20)


Fold the vinyl in half and mark each side of the center of the fabric with a 1/8” snip. CANVAS TOTE BAG PART 2(21) Do the same for the canvas fabric. CANVAS TOTE BAG PART 2 (22)


Center the pocket on one side of the canvas, keeping in mind the lower half of the pocket will be covered with the vinyl. My pocket is 2 ½” from the top of the canvas and 4 ½” from each side. CANVAS TOTE BAG PART 2(23) Pin the pocket to right the canvas fabric. Stitch along the edge of the pocket. CANVAS TOTE BAG PART 2(25)

Watch this week's Sew-A-Long Video:

What's the schedule?

July 7: Part 1: Supplies and Materials
July 14: Part 2: Constructing the Outside Pocket July 21: Part 3: Straps & Faux Leather Base July 28: Part 4: Sewing the Bag August 4: Part 5: The Lining August 11: Part 6: The Final Trim In part 3 of the Canvas Tote Sew-A-Long, we will add the straps and vinyl base. Leave your comments below with your progress on the tote bag. Are you embellishing your pocket? Be sure to share your photo’s on social media with #AngelaWolf, @BrotherSews and #StitchingSewcial – I always enjoy seeing your progress! Cheers, Angela angelas-sig