You can’t beat bug hunting for kids’ summer fun. Make this bag with your Brother embroidery machine and they will be kept busy prowling the bushes and grass. Whether the prey be creepy crawlies or fireflies, the adventure is a child’s version of a jungle safari. But where to put the catch? This fiberglass screen wire teepee bag (the name suggested by its shape) is a perfect accessory and holding pen. Use insect designs from iBroidery.com
and your personal design library to embellish the outside. Your Brother embroidery machine
handles the screen wire effortlessly. The stand-alone butterfly swaying inside the bag will intrigue the children and send them racing out the door into nature.
- Brother sewing/embroidery machine
- Open Toe foot,
- 4x4 or 5x7 frame to embroider more than one design in the same frame
- Fiberglass screen wire: 18 x 26” for bag embroidery and another large piece for stitch rehearsal of each potential design.
- Utility scissors for cutting screen wire and zipper
- Notions: zipper at least 18” or with plastic teeth. Longer is fine. It will be cut to size during construction; 8-10” cord or ribbon; monofilament, sewing and embroidery thread, seam sealant
- Extra heavy water-soluble stabilizer (wss)
Templates to Download:
- Template is 8.5" x 18"
- Download both left and right files below and piece together.
- layout template left
- layout template right
Templates look like this:
- Tiny bee/firefly
from iBroidery. Extract a single bee
- Ant-in Brother card Summertime reduced 20% (or use any kind of insect from BES 4,
or your own design library)
- Dragonfly from BES 4
- Ladybug on Daisy Stem
from iBroidery. Extract ladybug
- Baby Piglet & Snail
from iBroidery. Extract the snail.
- Bumble Bee
from iBroidery. Reduce bee by 20%
- Ethereal Butterfly
- Any insects in your design library
Preparation1. Print pattern/design templates. It is broken into two parts because my scanner bed is too small for the entire template. Print both the left and right templates and tape them together. 2. Print template of each design you plan to use. If deemed appropriate, resize to be proportional to the bag. 3. Cut 18 x 26” screen wire. This large size makes hooping easier. 4. Tape completed template to white surface or pin to padded surface.
Note: It may be necessary to trace over the lines with a wide black marking pen for better visibility.5. Center screen wire over template and tape or pin corners to hold in place. 6. Trace section placement lines onto screen wire with child’s “school” chalk. These lines show each section of the finished bag for suitable embroidery placement.
Note 1: To make the necessary marks, neither a sliver of soap, chalk marker or washout marker could be seen on the screen wire. Only white chalk, like that used on school black or green boards worked. Hmmm… were you ever in a classroom with a chalkboard? If so, you must be a grandmother like me.
Note 2: The screen wire will slip if not well secured when placed over the template. The red slashes show where it slipped and the line had to be redrawn after pinning it more securely to a padded surface.7. Place templates of selected embroidery designs in chosen location within the section.
Note: It is helpful to take a picture with your phone so you can refer to it as you embroider.8. Wind bobbin in each thread color used in the designs.
Embroidery9. Select one or two designs to embroider on one large side and load into machine. 10. Hoop screen wire and heavy-duty water-soluble stabilizer (wss). Puckering occurred when the screen wire was simply basted to the wss. 11. Touch the CAMERA icon, boxed in green at the top right of the screen in image # 5. Scan the hooped screen wire. 12. Call up your first design—the ant for this example. Use the stylus to drag the ant to the desired location. 13. Touch the Add icon boxed in orange at the bottom left of the screen. Bring in another design or however many you wish to add to that section of the bag. Drag each in place with the stylus. After embroidery, do not remove wss.
Note: Without the camera scanning function, pin the templates in place for placement.14. Continue hooping and embroidering each section. The wss is still in place on the back. Do NOT embroider the ladybugs now.
Note: To create the illusion of the ladybugs trailing up the green zipper they must be embroidered after the zipper insertion.