Description of Problem 100000002472
Why is my machine not printing (just feed out a blank label)?Description of Solution 200000003131
1. Try another cassette tape, there could be a problem with
2. If using batteries, try replacing all six batteries, not
just two or three.
3. If using an adapter, check the rating of the adapter. The
recommend adapter for this machine is the AD24, AD24ES, or AD30.
The label on the AD24/24ES should indicate that it is
Switching Adapter with the OUTPUT of 9VDC 1.6A. The label should also
indicate the + POSITIVE and the - NEGATIVE contacts of the adapter plug.
The outside surface of the tip at the end of the plug should be + POSITIVE and
the inside contact should be - NEGATIVE.
The label on the AD30 adapter, should list the OUTPUT as 7VDC
1.2A. The label should also indicate the + POSITIVE and the - NEGATIVE
contacts of the adapter plug. The outside surface of tip at the end of the
plug, should be + POSITIVE and the inside contact should be - NEGATIVE.
Using a wrong adapter can DAMAGE the machine internally and
void the warranty. The recommend adapter for this machine is the AD24,
AD24ES or AD30. You can order the adapter directly from Brother Accessory
Sales Department at 1-877-552-6255 or at our website at
If the problem persists, your machine may require
The machine has a one year limited exchange warranty. If the
machine is in warranty, call Brother Customer Service at 1-877-Brother
(1-877-276-8437) for warranty options.
If the machine is out of warranty, contact a Brother
Authorized Service Center for repair by clicking on the link below: