Description of Problem 100000020295
Why is one inch piece of lead tape feed prior to every label that prints out
and can this tape waste be eliminated?Description of Solution 200000025646
Due to the design and construction of the tape mechanism, it
is essential to feed a certain amount of tape through the machine before the
first label. However, by printing labels consecutively, subsequent labels can be
printed without this excess tape.
1. In P-touch Editor, click File =>
2. In the Print dialog box, select Chain
Printing and then click Print. The label will remain in the
printer until the next label is printed. Continue on creating and printing
out the next label. When all the labels are finished, press the CUT
button on the printer to feed out the last label.
Note: Chain Printing can also be selected in the printer
1. Click on Start => Control Panel =>
Printer (for XP click Start => Printers and Faxes).
2. Right click on the model PT9700PC or PT9800PCN and
then select Printing Preferences.
3. In the Printing Preference dialog box, under the
Basic tab, select Chain Printing.
4. Click Apply and then OK.