Overview Features Specifications
Machine specifications
TC-22B/TC-22B-O

[Travels] [Table] [Spindle] [Feed rate] [ATC unit] [Tool chage time] [Erectric motors] [Power source] [Machine dimensions] [Accuracy] [CNC unit model]
The figures in [ ] apply to the TC-22B-O
Item TC-22B[TC-22B-O]
12,000min-1 specifications 16,000min-1 specifications
Travels
X axis
mm(inch)
500 (19.7)[700(27.6)]
Y axis
mm(inch)
450(17.7)
Z axis
mm(inch)
410(16.1)
Distance between table top and spindle nose end
mm(inch)
250-660(9.8-26.0)[ 230-640(9.1-25.2)]
Table
Work area size
mm(inch)
650 x 450(25.6 x 17.7)[850 x 450 (31.5 x 17.7)]
Maximum loading capacity(uniform load)
kg(lbs)
250(551)
300(661)*-7
Spindle
Spindle speed
(min-1)
12-12,000 16-16,000
Speed during tapping
(min-1)
MAX.8,000
Tapered hole
7/24 Tapered no.30
Feed rate
Rapid traverse rate XxYxZ axes
m/min
(inch/min)
70 x 70 x 70(2,756 x 2,756 x 2,756)
Cutting feed rate
mm/min
(inch/min)
1-20,000(0.04-787)
ATC unit
Tool shank type MAS-BT30
Pull stud type MAS-P30T-2*-8
Tool storage capacity*-1
(pcs.)
18[+1]/27[+1]
Max. tool diameter*-2
mm(inch)
0-30(0-1.2)/D46 30-250(1.2-9.8)/D55
(Max.tool diameter D125)*-2
Max.tool lengeth
mm(inch)
250(9.8)
Max. tool weight*-3
kg(lbs)
3.5(7.7)
Tool selection
Double arm method (random shortcut)
Tool change time
Tool to Tool
(sec.)
0.9
Chip to Chip
(sec.)
2.4
Electric motors
Main spindle motor
(10 min./ continuous)*-4
(kW)
11/6 10/7.3
Feed spindle motor
(kW)
1.3(X,Y,Z)
Power source
Power supply

AC3Φ, 50/60Hz±1Hz

Power capacity (max.)
(kVA)
16[Max.32] 18[Max.37]
Air source
Working air pressure
(MPa)
0.4-0.6
Required flow*-6
(L/min)
180(at atmosphenc pressure)
Machine dimensions
Machine height
mm(inch)
2,538 (99.9)
Required floor space (with control unit door opened)
mm(inch)
1,496 x 3,102(58.9 x 122.1)[1,870 x 3,102(73.6 x 122.1)]
Machine weight (including control unit and splash guard)
kg(lbs)
2,780(6,129)[2,910(6,416)]
Accuracy*-5
Positioning accuracy
mm(inch)
0.005/300 (0.0002/11.8)
Repeatability
mm(inch)
±0.003 (±0.00012)
CNC unit
  CNC-B00

*-1 When all tools are small tools (D 55 mm or less)
*-2 The tools storage capacity, tool change time, etc., will vary when using large tools. The tool change time varies depending on the spindle type.
*-3 Actual tool weight varies according to the configuration and center of gravity. The figures shown here are for reference only.
*-4 Spindle motor output differs depending on the spindle speed.
*-5 Measured in compliance with JIS B6201-1987.
*-6 The values include 0.9 kVA for chip conveyor and 4.2 kVA for high-pressure coolant.
*-7 X/Y axes acceleration needs adjustment.
*-8 Brother spec. is applied to pull stud for CTS.