Answer to your Frequently Asked Question:

 
Printer Friendly
Description of Problem 100000023443

How do I adjust the tape margin?


Description of Solution 200000029873

1. Press the LABEL function key to display the Label attributes menu.

2. Press the UP OR DOWN ARROW key until the setting for the MARGIN is highlighted on the display.

3. Press the LEFT OR RIGHT ARROW key to select the desired setting.

There are four margin options:

Full:    Each label is printed leaving a margin of 0.98� (25 mm) on each end.

Half:   A margin of 0.98� (25 mm) is printed first, and then each label is printed leaving a margin of 0.47� (12 mm) before and after the text.

NOTE: Dots are printed in front of the text. Cut along the printed dots with scissors.

Narrow: A margin of 0.98� (25 mm) is printed first and then each label is printed leaving a margin of 0.16� (4 mm) before and after the text.

NOTE:  Dots are printed in front of the text. Cut along the printed dots with scissors.

Chain: Use this setting when printing several labels with minimum margins. Feed the tape before using the cutter. Otherwise a part of the text may be cut off. Do not try to pull the tape since this may damage the tape cassette.

 

NOTE:   After pressing Print, OK to Feed? appears. Press the Escape key to enter more texts or press the OK or Enter key to feed. The final label is printed with a 0.37" (9.4mm) margin to the right of the characters. Use scissors to cut off any part of this margin that is not required.

 

4. Press the OK or Enter key to apply the settings.

NOTE:   New settings are NOT applied if you do not press the OK or Enter key.

Was this helpful?
Please help us to improve our services by letting us know if this information was helpful: