SA126
Genuine Brother® Accessory
7 mm Narrow Hem Foot Designed to create a flat narrow hem on lightweight fabrics
This foot looks similar to the picot foot from the top
The groove under the foot is slightly wider and flatter to form and to create a beautiful narrow hem
Visit our online Authorized
Dealer Locator.
SA161
Genuine Brother® Accessory
Adjustable Zipper & Piping Foot
This foot attaches zippers and pipings easily. Its position can be adjusted exactly on the edge of the zipper/piping, avoiding the non-flat parts of them. It also presses the fabric with just the right pressure.
Zipper, Piping and Trim application foot
Adjustable zipper foot for left or right seams
Adjustable guide to accommodate varying piping dimensions
Single stitch opening for accurate and perfect straight stitch creation
*** Requires Low Shank Adapter for ULT Series, PC-6500, PC-8200 and PC-8500 sewing machines
Visit our online Authorized
Dealer Locator.
SA109
Genuine Brother® Accessory
Binding Foot Attaches bias tape with widths less than 7 mm (1/4 of an inch) using straight, zig zap or decorative stitches
The design of this foot places your ready-made bias tape or will fold and place precut bias strips correctly for easy sewing to the edge of a fabric
Visit our online Authorized
Dealer Locator.
SA114
Genuine Brother® Accessory
Non-Stick Foot (horizontal bobbins) Designed for consistent feeding with fabric such as leather, vinyl and other novelty fabrics
This non-stick foot glides over difficult fabric surfaces with ease, while improving stitch quality in many problem fabrics
Some fabrics may bind under metal feet often causing problems with a consistant feed resulting in poor stitch quality
The non stick foot overcomes problems with fabric such as loop and hook tapes, leather and vinyl. Perfect for hemming plastic tablecloths!
Visit our online Authorized
Dealer Locator.
SA125
1/4" Quilting Foot
For quilt and patchwork piecing with 1/4" or 1/8" seam allowances. Using the center needle, straight stitch position, the right front edge of this foot provides a guide for creating even ¼-inch seams for quilts, doll clothes and heirloom sewing projects. When using the left side of the foot as a guide, an 1/8-inch seam is created.
Visit our online Authorized
Dealer Locator.
SA141
Braiding Foot up to 5mm width
The adjustable guide on this foot offers perfectly centered hands free placement of cords, ribbon, braiding, or tape up to 5mm in width.
1. Loosen the screw on the presser foot and insert a braid through the guide
before attaching the presser foot on the machine.
2. Slide the plate of the guide back and forth to fit the width of the braid.
3. Tighten the screw and pull the braid behind the presser foot.
4. Attach the presser foot onto the machine.
5. Set the zig zag width slightly wider than the width of the braid.
6. Stitch braid in place.
Visit our online Authorized
Dealer Locator.
SA129
Clear Quilting Foot (Screw on Foot)
This foot is also called a darning foot and may be used as a free motion foot. The foot raises and lowers with the needle to allow fabric to be moved between stitches and to hold fabric in place while stitches are created.
1. Lower the feed dogs.
2. Set the machine for straight stitch.
3. Place the fabric beneath the presser foot.
4. Use both hands to hold the fabric firmly.
5. Begin to sew moving the fabric at an even pace.
(Screw on Foot. Requires Low Shank Adapter for ULT/PC series.)
Visit our online Authorized
Dealer Locator.
SA145
Clearview Foot for horizontal bobbin 7mm
The Clearview foot can be used with any application where visibility of seams or pattern markings are desired for ease in embellishment as the foot is clear plastic. This foot is similar to SA147 except this foot has a clear bar in front of the needle. Perfect for quilting applique'!
Visit our online Authorized
Dealer Locator.
SA110
Cording Foot for 7mm horizontal mach.
Used for embellishing with 1-3 cords. Cords or yarn are held by a clip on the top of the foot. Simply insert cords under the clip and stitch down using a serpentine zig zag or other decorative stitch. Great for couching! . Similar in use to SA157 & SA158
Visit our online Authorized
Dealer Locator.
SA142
Fringe Foot
The Fringe foot is a good tool for creating 3-D flowers, heirloom seam joins, surface texture and custom trims with a simple zig zag stitch. This foot was originally designed and used to mark construction details by creating tailor tacking, so feel free to use it as a great marking too as well!
Visit our online Authorized
Dealer Locator.
SA120
Gathering Foot for PS & PC series
The Gathering Foot can be used for lightly gathering fabric as well as attaching the gathered edge to a flat (ungathered) fabric, at the same time quickly and easily. The gathering foot will allow the sewer to gently ease or slightly gather fabric for various garment and home decorating applications.
Visit our online Authorized
Dealer Locator.
SA132
Quilting Guide for Foot Holder
The adjustable guide can be used to sew parallel rows at preset even intervals. Slide straight bar into the hole of the presser foot ankle or walking foot (equipped with a mounting hole). The distance from the needle may be adjusted by sliding the guide from left to right.
Visit our online Authorized
Dealer Locator.
SA143
Ruffler Foot for 7mm mach.
Ruffle and pleat like a pro. Create beautiful ruffles and pleats in varying depths and fullness with this adjustable ruffler. The new Brother ruffler makes fast work of creating ruffles, evenly spaced tucks, and gathers for home dec pillows and curtains. You can also create great trims with purchased ribbons. Single hole needle plate makes this foot perfect for ruffling lightweight fabrics as well!
Visit our online Authorized
Dealer Locator.
SA140
Walking Foot
The walking foot is a moving feed system that holds and moves fabric between the presser foot's upper feed dog and the machines's lower feed dogs to better control difficult fabrics as well as multiple layers of fabric. The walking foot is great for quilting, sewing when matching prints or plaids or fabric drift is an issue . Brother offers several Walking feet which differ in the size of the feed dog, shank height etc. Please check your manual or the machine listings on this web site to find the correct walking foot to fit your machine. Walking Feet are not for use in reverse or side to side sewing as well as some built in stitches that include other than forward movement of the feed dogs.
Visit our online Authorized
Dealer Locator.
SA176
Zig Zag Foot with Ankle
The zig zag foot with ankle set has a snap on foot for sewing over rises at the beginning of or in the body of your fabric. Simply tilt the foot and pull the button to set the foot. When a rise is encountered, the foot automatically realeases on it's downward slope. No more getting stuck at a rise or uneven stitches on the down side! This is also a great item to have on hand as a replacement for a lost or damaged ankle.
Visit our online Authorized
Dealer Locator.
