SA127
Genuine Brother® Accessory
5 mm Narrow Hem Foot Designed to create a flat narrow hem on lightweight fabrics
For narrow rolled hemming use the Narrow hemmer foot
This foot looks similar to the picot foot from the top
The groove under the foot is slightly wider and flatter form and to create a beautiful narrow hem
Visit our online Authorized
Dealer Locator.
SA161
Genuine Brother® Accessory
Adjustable Zipper & Piping Foot
This foot attaches zippers and pipings easily. Its position can be adjusted exactly on the edge of the zipper/piping, avoiding the non-flat parts of them. It also presses the fabric with just the right pressure.
Zipper, Piping and Trim application foot
Adjustable zipper foot for left or right seams
Adjustable guide to accommodate varying piping dimensions
Single stitch opening for accurate and perfect straight stitch creation
*** Requires Low Shank Adapter for ULT Series, PC-6500, PC-8200 and PC-8500 sewing machines
Visit our online Authorized
Dealer Locator.
SA109
Genuine Brother® Accessory
Binding Foot Attaches bias tape with widths less than 7 mm (1/4 of an inch) using straight, zig zap or decorative stitches
The design of this foot places your ready-made bias tape or will fold and place precut bias strips correctly for easy sewing to the edge of a fabric
Visit our online Authorized
Dealer Locator.
SA134
Genuine Brother® Accessory
Blind Stitch Foot Adjustable for creating blind hems on a variety of fabrics. While designed for blind stitching, the foot works well for edge stitching, lace and fabric edge joining.
A great foot for both embellishing and utility use
Visit our online Authorized
Dealer Locator.
SA122
Genuine Brother® Accessory
Non- Stick Teflon Foot (horizontal bobbin machine) Designed for consistent feeding with fabric such as leather, vinyl and other novelty fabrics
Non-stick foot glides over difficult fabric surfaces with ease improving stitch quality in many problem fabrics
Some fabrics may bind under metal feet often causing problems in consistant feed resulting in poor stitch quality.
The non stick foot overcomes problems with fabric such as loop and hook tapes, leather and vinyl. Similar to standard J and Clear-view feet.
Visit our online Authorized
Dealer Locator.
SA108
Genuine Brother® Accessory
Straight Stitch
The design of this foot improves contact with the feed dogs resulting in more accurate and consistant feed which creates a higher quality straight stitch
Also used for straight stitch applications using fine or lighter weight fabrics where a wide center foot opening might cause the fabric to be pulled into the bobbin area
Visit our online Authorized
Dealer Locator.
SA107
Genuine Brother® Accessory
Walking Foot
The foot is a moving feed system that holds and moves fabric between the presser foot's upper feed dog and the machines's lower feed dogs to better control difficult fabrics as well as multiple layers of fabric
Great for quilting/sewing when matching prints or plaids or fabric drift is an issue
Walking Feet are not for use in reverse or side to side sewing as well as some built in stitches that include other than forward movement of the feed dogs.
Requires the SA131 which is the Low Shank Adaptor
Brother offers several Walking feet which differ in the size of the feed dog, shank height etc. Please check your catalog, this website or machine manual
Visit our online Authorized
Dealer Locator.
SA125
1/4" Quilting Foot
For quilt and patchwork piecing with 1/4" or 1/8" seam allowances. Using the center needle, straight stitch position, the right front edge of this foot provides a guide for creating even ¼-inch seams for quilts, doll clothes and heirloom sewing projects. When using the left side of the foot as a guide, an 1/8-inch seam is created.
Visit our online Authorized
Dealer Locator.
SA141
Braiding Foot up to 5mm width
The adjustable guide on this foot offers perfectly centered hands free placement of cords, ribbon, braiding, or tape up to 5mm in width.
1. Loosen the screw on the presser foot and insert a braid through the guide
before attaching the presser foot on the machine.
2. Slide the plate of the guide back and forth to fit the width of the braid.
3. Tighten the screw and pull the braid behind the presser foot.
4. Attach the presser foot onto the machine.
5. Set the zig zag width slightly wider than the width of the braid.
6. Stitch braid in place.
Visit our online Authorized
Dealer Locator.
SA144
Clearview Foot for vertical bobbin 5mm
Clearview foot is used with any application where visibility of seams or pattern markings are desired for ease in embellishment as the foot is clear plastic.
Visit our online Authorized
Dealer Locator.
SA142
Fringe Foot
The Fringe foot is a good tool for creating 3-D flowers, heirloom seam joins, surface texture and custom trims with a simple zig zag stitch. This foot was originally designed and used to mark construction details by creating tailor tacking, so feel free to use it as a great marking too as well!
Visit our online Authorized
Dealer Locator.
SA120
Gathering Foot for PS & PC series
The Gathering Foot can be used for lightly gathering fabric as well as attaching the gathered edge to a flat (ungathered) fabric, at the same time quickly and easily. The gathering foot will allow the sewer to gently ease or slightly gather fabric for various garment and home decorating applications.
Visit our online Authorized
Dealer Locator.
SA135
Overlock Foot V (5mm)
The Overlock Foot is used for sewing overcast seams and protect edges from fraying. Use the overcast stitches in your machine and see what a difference this foot makes in their appearance and functionality!
Visit our online Authorized
Dealer Locator.
SA132
Quilting Guide for Foot Holder
The adjustable guide can be used to sew parallel rows at preset even intervals. Slide straight bar into the hole of the presser foot ankle or walking foot (equipped with a mounting hole). The distance from the needle may be adjusted by sliding the guide from left to right.
Visit our online Authorized
Dealer Locator.
